LS1/t56 swap

By BerettaLS
( 6 )

2 minute(s) of a 132 minute read

1-28-2018

aluminum 300zx

steel/iron, whatever it is lol. s14. looks like its not quite 7lbs difference like I thought. I think thats what I read anyways.

just sitting on the lower mount, no rotors. looks like I will have plenty of spacing between the tire now.

and thats the progress of the past few hours. once I get more gas for the welder ill build some quick upper mounts for the coilovers, drill the lower rubber mount to get the adapter in and mounted (holding off and getting the aluminum "bushing" pressed in for now), figure out a sleeve setup so I can use a smaller bolt in the adapter.. then recheck the rear roll center, and possibly lower the rear subframe a hair. Then double check the front roll center, build some sort of quick coilover mount, then its frame time!



Comments

Any updates ?

Posted by Diggymart on 4/20/23 @ 7:08:14 PM

Will be cool ??

Posted by Diggymart on 1/24/21 @ 2:15:42 PM

Any updates?

Posted by diyauto on 1/11/21 @ 7:46:35 PM

Thanks!

Posted by BerettaLS on 11/13/20 @ 3:47:30 AM

Impressive! Going to leave a lot of unsuspecting people in the dust with this thing

Posted by miatamatt on 11/6/20 @ 7:11:45 PM

Crazy in the best way possible.

Posted by MPower on 10/31/20 @ 3:11:38 AM

This thing is wild! That V8 fits in there nicely. Will be the ultimate sleeper.

Posted by stevegolf on 10/28/20 @ 11:34:27 PM