25.3 Outlaw Drag Radial Camaro Build by Eddie Krawiec

2 minute(s) of a 217 minute read

MORE PARTS!!!!!! I love the UPS guy and no not in that way.

Well back to the chassis stuff. I got my shocks today. I got all 4 coil overs from JRI Racing Shocks. They are top of the line. This is the shock that you would see under some of the Pro Stock Cars and now a few Radial cars out their if you were allowed to look under them. These things are killer. The longer one's are fronts and the shorter ones are the rear. With compression and rebound being key with a radial tire that is whay I went with the JRI.

Here is a picture with out the springs on them. I'm working on getting some Titanium Springs to save on weight. Every little pound counts and Ti springs are close to half the weight of steel.

Here you go.

I spent a lot of time doing this engine combo with Billy Briggs and we are almost at the point of knowing if it will all work out. We are looking to be on the dyno with it before the holidays if it all goes well. Here are a few pictures of Billy putting the bottom end together.