By diyauto
You must be logged in to rate content!
2 minute(s) of a 81 minute read
5-25-2011
I moved the cowl to inner fender supports to gain some tire clearance. The supports are mounted on the inside of the kick panel area and the lower cowl. Moving the suspension up gives me 1" clearance from the tire ,which should be sufficiant.
5-26-2011
I carefully cut out the rusted areas in the lower cowl and welded in some patches. I blasted the rest, applied rust bullet, scuffed and then epoxy primer, with weld thru primer at all the seams.
Read the Full Article:
http://www.lateral-g.net/forums/showthread.php4?t=30781&highlight=build
Cuda!
Posted by Diggymart on 10/12/21 @ 12:38:49 PM