Project:Soarer by megamax

By diyauto
( 5 )

4 minute(s) of a 462 minute read

2-1-2014

2-1-2014


well my insurance check came and luckily I scored a cheap excellent condition pair of headlights from the junkyard. also got a green bumper from the yard but the same car had a dent in the fender I needed. I have a member on club Lexus. that has one, but a pita to ship so keeping my eyes peeled for a oem green one in the mean time. 


and contemplating on doing a tsx high beam conversion on these minty headlights. 


in the meantime I finally received my black box. 






this is basically 2 Honda boxes made into one. hence why a jumper cable is needed. 






and the placement of this will be a challenge?? it comes with Velcro strips. iam prob going to hack up the oem plastic to make it fit. id rather wrap it in some damn plastic costing so much. 



2-27-2014


so nothing much has been going on. some how I uploaded a damn supra map and messed up my pre-loaded 1jz download. i got another map from a member on club lexus. but still won't let me send the map over to the ecu. i really haven't had time to **** around with the aem fully. but hopefully i will get some time after the 9th. and iam going to review all these videos.




anywhoo i ordered a aftermarket ijz intake. i figured since it wasn't that expensive i would take the plunge. 










haven't had a chance to see if the runners match up perfectly or if i need to port them. but other than that it is very light. and has some shavings that needs to be cleaned out. i do like the runners tho. 


apparently in china the work is really cheap.




$25.00 to make, well blow-me-job!!


so next up was a q45 throttle body(or so i thought). after securing one i later found out that it's not a true 90mm.





i think dr. web says it's really 87mm. either way i brought another aftermarket one that you can see the size difference.










the new tb comes with a flange for an exact fit on the mani 





luckily iam going to need that as the original flange bolts don't line up perfectly(just one). 




but spending a couple more bucks is expected with this kind of stuff and not really a big deal imo. 


i was shocked to see the premium that q45 tb's bring nowadays. they didn't used to go for 100.00.


and finally i got ready to get some good head!!!




got these puppies to service my leaky valve stem seals. just going to remove the head and maybe get a head job(leaning towards it). and finish up the mods with some 264 bc cams. 


what about the fuel you say?? well i already got a top feed rail and these babies. 


http://www.ebay.com/itm/191066482552...84.m1439.l2649



Comments

Great project!

Posted by Diggymart on 11/1/19 @ 10:59:41 AM