You must be logged in to rate content!
2 minute(s) of a 76 minute read
6-21-2013
6-21-2013
Harness is complete.I used pin 78b for the Ecu ground and I will be using the igniter 12v power. I used 51-57 for the 6 coil like you would a 2jzgte. I had a spare Ecu connector and added the extra pins.
Close up
Hopefully this weekend I will drop the engine in and off to the shop it will go to get the intercooler piping welded and downpipe fitted. I might fit the downpipe myself depending on how hot it is in Houston.
6-22-2013
Harness installed. Still need a few clamps to hold it under the intake manifold.
6-27-2013
Supra Tt rear caliper. Man are they huge compare to the sc300 rear.
Nice details!
Posted by Diggymart on 4/22/20 @ 2:32:46 PM