You must be logged in to rate content!
2 minute(s) of a 136 minute read
3-26-2013
3-26-2013
Update:
Got some more work done today. Spark plugs are gapped and installed, timing belt cover, boost logic crank pulley, drive belt tensioner. The crank pulley bolt can't be installed with the giant washer it comes with. Looks like I will have to dremel it off, or find one without the washer on it. Also need to find a socket that fits around the oil pressure sensor so I can torque it properly.
4-1-2013
Update:
Got some goods in today. The ID2000 injectors, and the JDL custom catch can. I was not impressed by the lack of polish on the catch can. However the welds look great, and it definitely worth the money I paid for it. So I polished it up, and it is looking much better now. I will have to make the lines for the can later on. I also ordered a new OEM fan shroud, lower shroud, and a replacement chrome center cap for the Supra wheels.
Going to work on the motor some more today, and see if I can finish it, so it is ready to install.
4-2-2013
Update:
Just cleaned up the alternator. Installed the upper timing belt cover, threw the distributor on loosely. Next will have to install the power steering pump and possibly the a/c compressor. Then try to put the new accessory belt on, put the engine on the engine hoist and then put the clutch on and transmission.
