p1800s- Project Black Widow build thread by Toomanytoys

3 minute(s) of a 59 minute read

7-16-2014

I decided to go with an all in one Vintage AC/ heater system. My car didn't have AC and the heater core was shot so a new stand alone system seemed best. It fits well under the dash with all the original system removed. I'm going to run the hoses through a bulkhead fitting attached to a plate I made to cover the original heater hole. Should look clean. Only downside is I won't have defrost since I'm not using original vents. Don't need it in Vegas anyway (You can get a system that uses existing vents but it looked a little bulky to me). I can look up the model # and $$ if you need it. 

Good luck.

9-13-2014

It's been a while since I updated my thread so here are some of the latest projects: I was able to get most of the wiring completed and bugs worked out. I upgraded to a 12v alternator system and on the advice of one of the other members, I installed a circuit breaker.

Sorting out engine bay wires...

Lights work!

Circuit breaker for added protection from frying wires

After getting the radio working, I decided that just two speakers in the rear weren't going to cut it. So I made a couple of speaker boxes and mounted 5 inch two ways under the dash. Sounds MUCH better. I wired rear quater panels as well but I don't think I will need to add any more speakers just yet.

New exhaust awaiting installation...

Unfortunatly I've gone about as far as I can without installing the engine. STILL waiting on the front end so I can get it done...anyone have a new front crossmember they want to get rid of? :