.::|Active Autowerkes Stage "TrippinBimmer" 330i ZHP Supercharged Street/Show Car|::. by WALKD U

3 minute(s) of a 146 minute read

Since it warmed up a good bit here in Ms. I start to paint my oil cooler and brackets semi-gloss black to match the rest of the kit.

I started to remove my Oil Cooler for the S/C around to see how I can mount my new engine oil cooler...

Here it is mounted in front of the radiator support and will be behind the sc oil cooler.

Lines routed and fittings are fitted. I will be modifying the AA S/C Oil Cooler Bracket. Similar to the M3 version (AA should just use this bracket for all e46 as it fits and looks much better.)

1-30-2013

Well my Viton Fluoroelastomer O-rings came in for the Technik/VPD Kit. These are very high quality compare to the BUNA O-rings that is on the kit originally. 

I measure everything myself O-Rings to the shaft to make sure these are the right one. I do have a few extra and be willing to sell them if anyone need replacements. 

Here they are on the Shaft nice and tight. I getting them done Dust Black. So it will match everything under the hood.

The cap before prep work.

Media Blasted and Custom Hangers...

Finish Product.

Technik/VPD Kit  My kit was banged up! I had to do some TLC...

I been online. You just stop iming me