Parts Needed:
- Lower Timing Washer T10368
- New Timing Tensioner
- Timing Tensioner Cover
- New Crank Bolt
- Engine Bracket Bolt N10701501
- Engine Mount Bolt N10552402
- Permatex Gasket Maker
Tools Needed:
- Engine Bridge
- Crank Counterhold tool T10355A
- Giant Carabiner
- Torque Wrench 1/2 in. drive and 1/4 in. Drive (range from 3 ft. lb. to 150 ft. lb.)
- Breaker Bar and Extension
- 1/2 to 1/4 Ratchet Set
- Flathead Screwdriver
- Plastic Scraper
- 5mm Pulley hold Pin
- Short 12mm triple square bit
- 10mm open end wrench
- T20 & T30 torx bits
- 24 mm Deep Socket
- 17mm socket
- 10mm socket
- socket extension set
- socket u-joint set
- 2 Axle Stands
- Hockey Pucks
- Trolley Jack (larger jack preferred)
- Block of Wood for Jack
You must be logged in to rate content!
5 minute read
Wow amazing thread! Deserves an Oscar!?
Posted by Diggymart on 10/12/20 @ 11:28:28 AM