Project: Trizz'l Vee Dos.. by n0ftInc

3 minute(s) of a 92 minute read

Finally got all the LEDs in today.

06.07.06

Motor bits are in..

Now, I need to source a few misc. gaskets I missed, a new knock sensor, low temp. fan switch, and to play it safe, a blue coolant sensor. Add in a bottle of water wetter, and I'll be ready to go.

06.14.06

Got the motor in tonight..few more bits to go!

07.01.06

Ready to rock!

Till next time..  

12.06.06

Well..out with the motor and off to C-Tech it goes for a nice follow-up inspection as to why my bottom end has been eatting a qt. every few hundred miles..over 8 qts. on the trip to H20 alone..

I'll try to keep this updated as progress is made. We are going to be mixing it up a bit, restorating a lot, and of course, taking advantage of some lower compression..

12.11.06

Made some progress with the car tonight.. Joe spent some time on the harnesses in the bay.

I got started on the interior. After the dash was out, we got started on the rats nest that lied underneath. 

By the end of it, we got the engine harness out.

I also ordered some goodies that should be here this week.

Pry won't be working on her again till this weekend.