You must be logged in to rate content!
4 minute(s) of a 46 minute read
11-7-2011
11-7-2011
pics
put the headlights ontop to take a look at how it will be.
Removed the headlight assembly.
measured out the cuts... hear we go again.
I had to trim up a few things, like the rear firewall had to be bounded back to fit the lens, the bumper brackets had to be trimmed etc.
test fitting, I need to have my body guy make brackets, since he is a better welder then myself. but this is how it stand so far.
a little update spent a few hours in the bodyshop today. I cut the hood and re adjusted it. Put the second bomex mirror on, and adjusted the headlights, trying to get the correct beam height etc.
here is where it stands.
The extra bit of CF i cut from the hood might make a cool canard lol
Both side cut, now I got to fiberglass the hood over the lense... uhh more work.
i still need to make brackets to hold the lights in place, and finish off the fiberglass work, then finish, the rest uhh it never ends.