You must be logged in to rate content!
3 minute(s) of a 68 minute read
8-17-2014
Small update Finally installed my fuel pump. Figured id do a step by step on this one.
Popped off the spare tire shield
Blew it out to clean out the dust and made sure nothing could fall in.
Then pulled the fuel hanger assembly
Comparing the pumps
Tools used
Connector getting hacked
Green is Positive
stripped and prepared to solder
shrink wrap put on BEFORE solder
Soldered
Heated up and shrank well
Put the new pump on the hanger with the new hose.
Didn't use the supplied clamps though since i didn't like them just used some extra ones i had lying around.
Re installed the assembly and connected everything back up and turned the key to make sure the float was still reading and it was fine ! now i need to hook up the relay and see if i can hear the pump working.