You must be logged in to rate content!
2 minute(s) of a 68 minute read
7-11-2014
Some more progress.
Separate the engine from transmission
cleaned the transmission
removed the clutch and flywheel
put the engine on the stand flipped it over and started on removing the oil pan
every thing looks clean and no chunks Just a couple dents from the outside and a piece of gasket that came off while i was pulling the pan off.
oil pickup nice and neat
under it all
Took the mid section off
Time to clean all the nasty old gasket material off
So thats my progress for today. Tomorrow going to drill the mid section of the pan for the return flange and dril and tap the holes for the bolts. Probably going to use 12mm bolts for the flange or 10 mm.