Going Single after 10 years / SP F1 Manifold, PTE6265 by Josh S

2 minute(s) of a 66 minute read

Had a pretty productive day today, got the fuel system pretty much finished up.

First I mounted the injectors and fuel rail to the lower runners.



Here is the FPR mounted to the bracket from the SP kit. I had a bit of trouble getting this installed. It mounted to the studs where the stock pressure tank was. Once I got it in there it is a nice place to hide it, but just a bit tricky to install.



Here it is mounted:

Lower runners installed:

I then wired up the injector pigtails and get them all plugged in:

I got the intake manifold installed as well:

Next up will be to install the throttle body and get everything plugged back in.  

And for new news, I'm seriously considering going stand-alone while I'm at it. This build is taking quite a bit longer to come together than I had planned, both in me getting the work done as well as getting the parts delivered. I'm starting to think I should get put a stand-alone in now rather than later. Debating between the AEM V2 and the Pro-EFI.