The return of old white shitty by NashMan

3 minute(s) of a 31 minute read

Well I pulled my diff because my oil broke down to fast it's band new and hardly no mileage

Suspect was to much heat reason to tight of gear mesh

I got this diff done for me like 3 year's ago and they did a shitty job the mesh was from heel to toe of the ring gear and zero back lash

and they hammer in the side carrier shims and looks to me like they did not use a case spreader

well i was going to fix it my self but i don't have shim's so fuck it i called them back and bitched at them about what i saw and they agreed to fix it as they should why should I have to fix something I paid for and the funny part is i told them gonna check there work it did not phase them so i though ti was all good.......


well i was happy tell I got the diff back


gear mesh was good thank god perload was good too

cons-
only 3 blots were tight on the back cover last ones were hand tight if that
use shit load of silicone about close to 1/2 sweez though
diff itself was cover in metale like some one was grinding near it when it was open

so i called them open told them what i saw and that was that



any way this is the turn out i got aka my pattern it's pretty good so that is a plus





now what reallt suck is just ot qoute fro kazz lsd fulid and it is 60 bucks a can:


spec's on my diff

solid spacer
3.91 gear
kazz lsd
kazz fulid


this just goes to show you do all your own work if you can trust no one