You must be logged in to rate content!
11 minute(s) of a 221 minute read
3-28-2013
NX1600 digital dash test fit
Xene removing the ecu connector so we can make a plug and play harness
installing the rear plexiglass for the first time... lets say it did not go as smooth as i thought lol. but hey its in.
got all my supplies
Drilled holes to rivet the glass in place
Cleaned the plexi and the surface area of the fiberglass hatch
Layed out the ultra black
Freaking rivatgun busted on my... lol already layed out the ultra black.... so I had to improvise... used self tapping screws
3-30-2013
A few new things. Takata harness
and some redlines, but I need to LED convert these.
3-31-2013
Xene, with a little help from myself, got the AE86 to start!!!! yeah, it was a little ghetto but it worked! now we have it running, going to hardwire it up, clean it and tuck as much as possible! I can not wait to have her on the road!
One of my coilpacks blew up lol... not sure why or how, but I ordered a new one, and also a corolla dual core radiator.
Redline VS LED usdm
Redlines with my buddies xene's sick gen4 3sgte celica
Redlines installed, just need to LED convert them ASAP
Also got my Takata's looking sexy with my Recaros, time to make brackets for the seats!
List of what is left to do.
1) Wire in inline fuel pump to tank
2) permanently wire up sr20det harness and solder and heatshrink and tuck
3) flare and attach brake lines.
4) measure and order out driveshaft
5) install new radiator
6) wire up digital dash
7) Finish welding exhaust
8) replace coil pack
9)weld seatbracket
10) led convert redlines
but its getting closer, I am going to try to best my butt and get it done asap. I just need to stay motivated.
4-1-2013
Ya to each there own. I like the USDM that I LED converted, but I have a some JDM love for the redlines for now and I will convert them to LED too
My buddy hooked me up with some extra braided lines, so I have Oil feed, oil return, coolant feed, and coolant return all braided with AN fittings. He also gave me the correct MAF adapter plug so it can be plug and play.
A few changes, since the OEM manifold and elbow was having some interference with the steeringlinkage, I opted for my friends topmount manifold, and Turbonetics external wastegate set up. It gives me so much more room for the elbow/downpipe.
But with some sacrifices, I need to re-clock my turbo, re-weld the intercooler pipe to match the new locatio, and weld closed the interal wastegate. all for the better, just giving me more stuff to do. I will post pics soon
4-2-2013
Opened my second garage with the ae86 stuff, and I pondered.... am I collecting, or Hoarding lol
Started installing a window trim to cover the UGLY RTV window job I did.
Cut holes to make it flat
looking better just need to smooth out the RTV, then when it is painted u wont be able to tell.
4-3-2013
Get your Favorite drink, Sapporo, HITE, Taiwan Beer, Black Boss
Drink that BIAATTTTCH from da bottom!!
...and....Enjoy it
Get some resin, mix it and poor it inside, wink wink grrrrr ;*)
Let it get really hard heheheheeheh
Drill a hole yeah baby
the screw it, screw it hard.... with a proper size fitting LOL
and install!
Topmount manifold, with Turbonetic external Wastegate.
Disassembled Turbo to re clock for proper oil feed placement and angle
polishing housing
Home made Turbo inlet
Let make it a little shinny
Re-installing turbo, getting closer
Turbo re-install with oilfeed, oilreturn, and coolant lines
inlet installed
Turbo blanket, MAF etc all on
3-4-2013
Got hose for the oil return line and wrapped it in heat shield.
refurbished the radiator mounting brackets.
Started cutting up the hose kits so it will fit the ae86 2core radiator to the sr20det
Nice
Why not add some copper to spice up the mix
Cut to size
Time to cut the water neck to fit
Oh yeah!
Bottom pipe fitted
I have a radiator!
Car looking sexy
ALso wired up the ECU
xene re-wired the injectors, because they where really messy from the PO
Re did my intercooler piping for the topmount exhaust manifold, and I did not have to pay a dime!
Had to cut down the intercooler piping
and trim down the turbo piping
It fits!!!!
Re-routed the battery to the trunk
The junctionbox in the engine bay
Wiring it to through the cabin
Yeah power in the boot
Tired, but got a stuff done, lots more to do.... but every day is getting closer.
Wow amazing!
Posted by Diggymart on 11/1/19 @ 3:00:13 PM