You must be logged in to rate content!
4 minute(s) of a 221 minute read
9-10-2012
FINISHED After a clear coat and tinting
9-13-2012
Got some work done, and took some pics.
Mounted the brake ducts, and made brakets and angled the tube so it will help cool the FC brakes.
Then started working on the SR20DET valley cover for the coilpacks, I heard that many people take them off cause the heat can decrease the longevity of the packs, or they buy a vented valley.
So I thought why pay 150 bucks for something I can make for free pretty much. So I started cutting out the center of the cover.
I still need to even it all out.
Then Found Some perforated metal I had laying around.
Cut out some CarbonFiber matt I have, just need to find my resin and hardener so I can lay it on and trim to fit!
9-15-2012
Cleaned up the cuts with my angle grinder
Test fit the mesh
First layer of CF
After it hardened
Trimming it down to size
Hey its starting to look like a valley cover again
Cut out the venter for the vents
all finished, just need to wetsand and polish still, but that will be done later.
9-17-2012
Started work on the stock eyelids, thought it would look nice to match them to the car with some CF accents.
Wow amazing!
Posted by Diggymart on 11/1/19 @ 3:00:13 PM