When ocd meets opportunity ..... The 91 Legacy ss project by 22B05STI

4 minute(s) of a 236 minute read

7-23-2013

I am already well underway with the assembly of the trim and I have all the glass in the doors and manual window regulators in and the trunk assembled, I have the brake lines and fuel lines run through the car. I will post more pics soon, here's a few to give you all a glimps

7-28-2013

I have had a few people ask me about removing the trim so I will post a few photos that will show what holds the trim in place, once the rubber door seals are removed and the screws removed from the channel that retains the door seals, then the trim can be removed from the clips. There is a nut on the rear corner window trim that needs to be removed from the inside of the car, so the inside trim piece needs to be removed to get to it, I have taken a photo of that so it will make sence

The last photo shows the trim with the channel removed, you can see that the screws go through the trim !

Now for a project update, I have fit most of the trim on the car, I am missing the trim on the left front door(center moulding) and both rear doors I need the trim that runs against the glass. I have most of the fuel system in except for needing a few clamps to finish the job. I have all the window regulators in and all the glass and door seals installed as well as the locking Mechanisims. I fit the window wiper mechanism back in place and all the lock mechanisim back in place in the trunk.

Here's the photos

Here are some photos of the doors etc now all back together