By diyauto
You must be logged in to rate content!
2 minute read
Paint STi logo on intercooler
Compliments of Spaceman @ www.iwsti.com
8-14-2008
A Quick and Easy way to get the STi logo on your TMIC.
1. Purchase a pre-cut stencil with adhesive backing from GraphicSTI
2. Purchase some Hi-Temp Paint. I went with Dupli-Color Caliper Paint found at AutoZone.
3. Brush off any debris that may be on your intercooler.
4. Center and adjust the stencil so that it is straight. Remove the backing from the stencil and adhere the stencil to the intercooler.
5. Mask off the area around the intercooler so you don't get any over spray.
6. Spray a light coat onto the intercooler. Let it dry and remove the masking tape and newspaper.
And enjoy...
Read the Full Article:
http://www.iwsti.com/forums/diy-mods-and-installations/131134-paint-sti-logo-intercooler.html