IT RUNS!!! - My 500whp build - Element motor and Moore Performance Twin Scroll Kit! by dexterous

2 minute(s) of a 312 minute read

I spent tonight finishing up some wiring in the trunk area and putting everything together (hopefully for the last time). Here are a number of picts that I took while wiring everything up.

Here's my Hydra harness prepped with a custom wire at pin A11 for PWM12.

Here's the finished product, the Hydra, Hydramist controller and my custom mods (Fuel Pump control and much more).

I'm a Network Engineer and in the IT business we call this a service loop. Its in the trunk area where the stock water tank would go just in case I need to rearrange anything.

Here's the back side of the trunk liner. As you can see, its pretty neat back there and EVERY wire is labeled and color coded.

Finally, here's the relay that I installed to interface the Hydra with the Aeromotive fuel pump controller.