You must be logged in to rate content!
2 minute(s) of a 99 minute read
11-13-2010
well this project is nearly done and I will post a few more pictures of the car before I am done. I will add all the torque specs I found and needed in the factory manual to do this job. Most people probably won't be interested in all these specs but I like to do everything by the book, so here they are!
TORQUE SPECS: SUBARU STI
FRONT HUB BEARING (FOUR BOLTS) 47.9 FTLBS
FRONT AXLE NUTS 162 FTLBS
ABS WHEEL SPEED SENSOR 24.3 FTLBS
FRONT STRUT BOLTS (CAMBER) 129 FTLBS
FRONT TIE ROD 19.9 FTLBS
BALL JOINT THROUGHT BOLT 37 FTLBS
FRONT BALL JOINT CASTLE NUT 19.9 FTLBS
FRONT BRAKE CALIPER 80 FTLBS
BRAKE HOSE TO STRUT 23.6 FTLBS
BREMBO BRAKE CALIPER BLEED SCREW
BRAKE HOSE BANJO BOLT TO CALIPER 13.0 FTLBS
FRONT BACKING PLATE TO UPRIGHT 13.0 FTLBS
REAR AXLE NUT 140 FTLBS
REAR LATERAL LINK 103 FTLBS
REAR TRAILING LINK 66 FTLBS
REAR STRUT BOLTS (TO UPRIGHT) 145 FTLBS
REAR STRUT MOUNT TOPS 14.5 FTLBS
REAR STRUT INSERT 30 FTLBS
REAR BRAKE CALIPER 47.9 FTLBS
SWAY BAR LINK 33.2 FTLBS
REAR BACKING PLATE TO UPRIGHT 38.3 FTLBS
11-13-2010
rear upright and backing plate
rear suspension
11-14-2010
project is finished