You must be logged in to rate content!
2 minute(s) of a 49 minute read
9-18-2013
9-18-2013
First pic shows the seat rails. The seat will be fixed front to back but the sitting position can be adjusted. They're powder coated clear.
Second pic is the steering hub. The stock piece was really heavy so we turned it down to the minimum. Oh ya, we powder coated it.
Third pic is the front sub frame from a 997 RSR. It's stronger and has far more adjustment than the stock piece. This is part of how we are correcting the geometry for the lowered car. It's powder coated clear too.
10-2-2013
Some more misc pics. The PS installation is really clean. We raised the steering rack 20mm. And notice where we put all the weight ... behind the axle and on the right front.
Did this project ever see the track?
Posted by GroupJ on 10/27/23 @ 4:02:40 AM