1977 CHEVY C10 LONG BOX

OldeCarrGuy's rides

Home
OldeCarrGuy's profile
1977 CHEVY C10 LONG BOX

By OldeCarrGuy

( 6 )

Vehicle: Chevrolet - C/K Gen3

Engine: 5.7L V8

MY SQUARE BODY PROJECT

This is my 80,000 mile 77 C10 I call Dale. I purchased it in November 2019 in upstate New York but originally a New Mexico truck. It spent it's first Canadian winter cooped up in my garage as I replaced the cab corners and rockers all while trying to maintain the original paint. Just finished swapping the engine with a mildly built 350 and changing the trans over from a TH350 to a 700R4. Lots more to come on my YouTube channel (Olde Carr Guy) . I hope you can follow along.

Powered by Froala Editor

Builds, DIYs, Articles, & Reviews

AP XLERATOR MUFFLERS INSTALLED ON MY 1977 SMALL BLOCK CHEVY C10

AP XLERATOR MUFFLERS INSTALLED ON...

4/16/20 @ 7:11:16 PM

DOUBLE HUMP HEADS & EDELBROCK PERFORMER RPM INTAKE PART 4 SBC CHEVY

DOUBLE HUMP HEADS & EDELBROCK PERF...

4/16/20 @ 7:14:07 PM

PART 3 BUILDING UP A SMALL BLOCK CHEVY 350 FOR MY 1977 CHEVY C10

PART 3 BUILDING UP A SMALL BLOCK C...

4/16/20 @ 7:14:38 PM

CRANKSHAFT INSTALL PART 2-BUILDING UP A SMALL BLOCK CHEVY 350 FOR MY 1977 CHEVY C10

CRANKSHAFT INSTALL PART 2-BUILDING...

4/16/20 @ 7:15:31 PM

NEW PISTONS INSTALLED ON RODS PART 1-BUILDING UP A SMALL BLOCK CHEVY 350 FOR MY 1977 CHEVY C10

NEW PISTONS INSTALLED ON RODS PART...

4/16/20 @ 7:17:15 PM

SMALL BLOCK CHEVY BUILD BACK FROM THE MACHINE SHOP AND ITS TIME TO CHECK INVENTORY

SMALL BLOCK CHEVY BUILD BACK FROM...

4/16/20 @ 7:18:07 PM

How to Restore a faded or oxidized paint job on a 1977 Chevrolet C10 truck

How to Restore a faded or oxidized...

4/16/20 @ 7:25:48 PM

HOW TO REMOVE AND INSTALL TAILGATE TRIM ON A 1977 C10 TRUCK- THE RIGHT WAY AND THE WRONG WAY

HOW TO REMOVE AND INSTALL TAILGATE...

4/16/20 @ 7:26:17 PM

HOW TO REMOVE AND INSTALL A TAILGATE HANDLE IN A 1973 TO 1987 CHEVROLET C10

HOW TO REMOVE AND INSTALL A TAILGA...

4/16/20 @ 7:27:13 PM

HOW TO DIY PAINT A TAILGATE FOR A 1977 CHEVY C10 TRUCK- SUCCESS OR FAILURE

HOW TO DIY PAINT A TAILGATE FOR A...

4/16/20 @ 7:27:42 PM

SOURCING OUT A SMALL BLOCK CHEVY 4 BOLT MAIN AND DOUBLE HUMP HEADS FOR MY 1977 C10

SOURCING OUT A SMALL BLOCK CHEVY 4...

4/16/20 @ 7:28:42 PM

HALOGEN HEADLIGHT CONVERION IN A 1977 CHEVY C10 TRUCK

HALOGEN HEADLIGHT CONVERION IN A 1...

4/16/20 @ 7:29:14 PM

DIY How To Replace Inner And Outer Tie Rod Ends - Idler & Pitman Replacement on a 1977 Chevy C10

DIY How To Replace Inner And Outer...

4/16/20 @ 7:31:29 PM

PART 2 How to Install a Molded Industrial Polyvinyl MIP Floor Mat In a 1977 Chevy C10

PART 2 How to Install a Molded Ind...

4/16/20 @ 7:32:02 PM

DALE THE TRUCK UPDATE- MY 1977 CHEVY C10 TRUCK

DALE THE TRUCK UPDATE- MY 1977 CHE...

4/16/20 @ 7:33:17 PM

HOW TO INSTALL FRONT LEAF SPRING HANGERS FROM LMC TRUCK ON A 1977 CHEVY C10 TRUCK

HOW TO INSTALL FRONT LEAF SPRING H...

4/16/20 @ 7:46:53 PM

PART 1 How to Install a Molded Industrial Polyvinyl MIP Floor Mat In a 1977 Chevy C10

PART 1 How to Install a Molded Ind...

4/16/20 @ 7:47:30 PM

HOW TO REMOVE THE BODY SIDE MOLDING ON A 1973 1980 CHEVY C10 K10

HOW TO REMOVE THE BODY SIDE MOLDIN...

4/16/20 @ 7:48:01 PM

HOW TO REPLACE AND BEND NEW BRAKE LINES ON YOUR 1977 CHEVY C10 TRUCK

HOW TO REPLACE AND BEND NEW BRAKE...

4/16/20 @ 7:49:18 PM

FIRST START WITH NEW EXHAUST AND GLASSPACKS FROM LMC TRUCK ON MY 1977 CHEVY C10 TRUCK

FIRST START WITH NEW EXHAUST AND G...

4/16/20 @ 7:49:46 PM

HOW TO REPLACE UPPER BALL JOINTS ON A 1977 CHEVY C10 TRUCK

HOW TO REPLACE UPPER BALL JOINTS O...

4/16/20 @ 7:50:32 PM

HOW TO LOWER THE FRONT SUSPENSION ON A 1977 CHEVY C10 TRUCK PART 3

HOW TO LOWER THE FRONT SUSPENSION...

4/16/20 @ 7:51:13 PM

HOW TO INSTALL A BELLTECH C NOTCH KIT ON MY 1977 CHEVY C10 TRUCK PART 2

HOW TO INSTALL A BELLTECH C NOTCH...

4/16/20 @ 7:52:03 PM

HOW TO INSTALL A BELLTECH C NOTCH KIT ON MY 1977 CHEVY C10 TRUCK-PART 1

HOW TO INSTALL A BELLTECH C NOTCH...

4/16/20 @ 7:53:49 PM

COLOR MATCHING ORIGINAL BUCKSKIN PAINT ON MY 1977 CHEVY C10 TRUCK

COLOR MATCHING ORIGINAL BUCKSKIN P...

4/16/20 @ 7:54:39 PM

HOW I REPLACE CAB CORNERS AND ROCKER PANELS ON MY 1977 CHEVY C10 SQUARE BODY PART 3

HOW I REPLACE CAB CORNERS AND ROCK...

4/16/20 @ 7:55:12 PM

FINALIZING THE PATCH PANELS ON MY 1977 CHEVY C10 PICKUP-SETTING 2020 GOALS

FINALIZING THE PATCH PANELS ON MY...

4/16/20 @ 7:55:42 PM

HOW TO PATCH A RUSTY FENDER ON A 1977 CHEVY C10 TRUCK

HOW TO PATCH A RUSTY FENDER ON A 1...

4/16/20 @ 7:56:13 PM

UNBOXING THE BELLTECH 4/6 DROP KIT FOR MY 1977 CHEVY C10 PICKUP

UNBOXING THE BELLTECH 4/6 DROP KIT...

4/16/20 @ 7:56:52 PM

HOW TO INSTALL HOOD HINGE BRACES FROM LMC ON A 1973 1987 CHEVY C10

HOW TO INSTALL HOOD HINGE BRACES F...

4/16/20 @ 7:58:08 PM

FINISHING UP ON THE PASSENGER SIDE CAB CORNERS AND ROCKER PANELS ON MY 1977 CHEVROLET C10 TRUCK

FINISHING UP ON THE PASSENGER SIDE...

4/16/20 @ 7:58:54 PM

HOW TO REMOVE THE GAS TANK ON MY 1977 CHEVOLET C10 TRUCK

HOW TO REMOVE THE GAS TANK ON MY 1...

4/16/20 @ 7:59:20 PM

HOW I REPLACE CAB CORNERS AND ROCKER PANELS -1977 CHEVY C10 SQUARE BODY PART 2

HOW I REPLACE CAB CORNERS AND ROCK...

4/16/20 @ 7:59:56 PM

PREPARING MY 1977 CHEVROLET C10 FOR ROCKER PANEL AND CAB CORNER REPLACEMENT

PREPARING MY 1977 CHEVROLET C10 FO...

4/16/20 @ 8:00:24 PM

HOW TO REMOVE THE SEATS, CARPET AND SEAT BELTS IN A 1973 1987 CHEVROLET C10 PICKUP

HOW TO REMOVE THE SEATS, CARPET AN...

4/16/20 @ 8:02:05 PM

HOW TO PREPARE FOR A LOWERING KIT ON YOUR 1973-87 C 10 SQUARE BODY

HOW TO PREPARE FOR A LOWERING KIT...

4/16/20 @ 8:03:23 PM

HOW TO REPLACE A BLOWER MOTOR ON A 1973-1987 CHEVROLET C10 AND SUBURBAN UP TO 1991

HOW TO REPLACE A BLOWER MOTOR ON A...

8/12/20 @ 3:31:26 PM

LIKE UNITED BY TRUCKS I HAVE TO DIAGNOSE WHATS WRONG WITH MY SQUARE BODY TRUCK

LIKE UNITED BY TRUCKS I HAVE TO DI...

8/12/20 @ 3:32:23 PM

HOW TO FABRICATE AN OBS BENCH SEAT INTO A 1977 SQUARE BODY CHEVY TRUCK

HOW TO FABRICATE AN OBS BENCH SEAT...

8/12/20 @ 3:33:27 PM

HAND PAINTED DOOR LOGOS ON A 1977 CHEVY C10- A DYING ART FORM

HAND PAINTED DOOR LOGOS ON A 1977...

9/14/20 @ 1:32:07 PM

INSTALLING NEW BRAKE PEDAL PIVOT BUSHINGS ON MY 1977 CHEVROLET C10

INSTALLING NEW BRAKE PEDAL PIVOT B...

9/14/20 @ 1:32:58 PM

WITH YOUR HELP I HAVE FOUND THE NOISE IN MY 1977 CHEVROLET C10

WITH YOUR HELP I HAVE FOUND THE NO...

9/14/20 @ 1:35:53 PM

MY 1977 CHEVROLET C10 FINALLY GETS THE SWAP YOU HAVE BEEN ASKING FOR

MY 1977 CHEVROLET C10 FINALLY GETS...

9/14/20 @ 1:36:53 PM

I FIXED THE INTERMITTENT BAD IDLE IN MY 1977 CHEVY C10 BUT IT WASN'T WITH A QUADRAJET

I FIXED THE INTERMITTENT BAD IDLE...

9/14/20 @ 1:38:30 PM

FIXING THE ENGINE NOISE ON THE FRESHLY REBUILT SBC 350 ON MY 1977 CHEVY C10

FIXING THE ENGINE NOISE ON THE FRE...

9/14/20 @ 1:41:05 PM

ADJUSTING THE VALVE LASH WITH THE ENGINE RUNNING IN MY 1977 CHEVROLET C10 AGAIN

ADJUSTING THE VALVE LASH WITH THE...

9/14/20 @ 1:42:17 PM

I BROKE A ROCKER ARM AND PUSHROD ON MY 1977 CHEVY C10

I BROKE A ROCKER ARM AND PUSHROD O...

9/14/20 @ 1:43:15 PM

NEW 18 INCH TORQ THRUST 2 AMERICAN RACING WHEELS ON MY 1977 CHEVY C10

NEW 18 INCH TORQ THRUST 2 AMERICAN...

9/14/20 @ 1:43:59 PM

How to replace the ignition switch and key lock cylinder in a 1977 Chevy C10

How to replace the ignition switch...

9/14/20 @ 1:45:00 PM

How To Retrofit an AC System R-12 to R-134a on my 1977 Chevrolet C10 - Lunchtime tow bill

How To Retrofit an AC System R-12...

9/14/20 @ 1:45:37 PM

ADJUSTING THE PINION ANGLE IN MY 1977 CHEVY C10 TRUCK

ADJUSTING THE PINION ANGLE IN MY 1...

9/14/20 @ 1:52:02 PM

HOW TO INSTALL THE BODY SIDE MOLDING ON A 1973 1980 CHEVY C10 K10

HOW TO INSTALL THE BODY SIDE MOLDI...

9/14/20 @ 1:53:19 PM

MY 1977 CHEVROLET C10 HAS A BROKEN MOTOR AGAIN-PART 1

MY 1977 CHEVROLET C10 HAS A BROKEN...

11/9/20 @ 11:43:44 AM

SETTING THE VALVE LASH WITH NEW ROCKER ARMS AND PUSH RODS IN MY 1977 CHEVY C10-part 2

SETTING THE VALVE LASH WITH NEW RO...

11/9/20 @ 11:44:15 AM

View All Articles

Comments

Looks clean

Posted by detroitheaders on 5/12/20 @ 3:13:15 PM

Is that two-tone? Like the combo,

Posted by Diggymart on 4/19/20 @ 1:50:22 PM

Looks pretty clean! Nice truck!

Posted by miatamatt on 4/18/20 @ 12:21:52 PM