Infamous Celica

 
The name “Infamous Celica” comes from people often knowing me because of this car/the group or both before I know them not always for great reasons haha.


What started as a normal 400 dollar commuter turned into a full blown project, forum and facebook group.
I had always had certain imports I wanted but in a muscle car family they never made much sense, smog, low production on good trim levels etc so I never bought one.
This car definitely grew on me, it bothered me a lot that it was a toyota because toyota at the time was beyond lame offering the Toyota Highlander hybrid as their fastest vehicle (LOL truth!)

It started with a subwoofer I got for free and some lowering springs.
All shit broke loose after that.


----Mechanicals----(old)
-92 5sfe
-Australian header
-250cc (dark green) injectors
-Blox fpr
-160 amp alternator
-deleted cruise control
-deleted egr
-light flywheel

——Mechanicals——(new)
-2010 ish Sienna (yes a mini van) 2grfe
-Frankenstein Motorworks headers
-Frankenstein Motorworks ecu
-wiregap modified engine harness
-Frankenstein Motorworks long axle (modified for factory viscous LSD and 2grfe)
-overkill engineering FBW pedal mount
-overkill engineering 3 core civic radiator mount
-overkill engineering rack strap relocation bracket
-overkill engineering passenger side 2grfe motor mount
-overkill engineering throttle cable plug
-radium engineering fuel rails
-aeromotive FPR
-aem 320L/hr fuel pump
-custom 2.25” exhaust(for now)
-fidanza flywheel
-Arp flywheel bolts

-South bend clutch
-99 Camry iron clutch fork
-big grounds and alt wire
-TRD sports 18x9.5 +38 front/18x9.5 +45 255/35 all around
-E56 w/the viscous  lsd  
-aluminum shift bushings
-shifter spacer for less slack in the linkage
-extended shift lever
-T3 camber and caster top plates,
-T3 rear links,
-T3 sway bar links,
-Suspension Techniques rear sway bar,
-aftermarket rear strut brace
-ultra racing fender braces,
Megan racing street coilovers modified with swift springs
-10kg/mm front and 10kg/mm rear springs currently
-6kg/mm front secondary springs and 4kg/mm rear secondary springs
-working on extending the rack and using shorter tie rods,
-T3 (sw20) tie rod flip
working on switching to an aw11 rear knuckle on the front (swapped to 5x114.3) for extending ball joints and a lower tie rod attachment,
-360x30 (isf front) covered in modified isf calipers using overkill engineering brackets.
-345x28 (isf rear) rotors rear covered in stoptech st40 calipers and overkill engineering modified tesla brembo ebrake caliper
-volvo/ford electric power steering pump
-sst braided brake lines
-TTE replica carbon Kevlar fan shroud (dual celica fans)
-TTE replica carbon kevlar skid plate


----Interior----
-Jvc touch screen
-4" inifinity kappa's front
-6.5" Rockford fosgate T1's rear
-1" sound stream tweeters all around
-8" cadence doors
-12" Rockford fosgate power DVC subwoofer
-400 watt ram 2 channel Rockford fosgate amp (doors and rears)
-1000w rms mono Rockford fosgate amplifier
-is300 steering wheel, recovered in alcantara
-tall arm rest cover in suede
impul bucket seats
-Weighted impul shift knob
-carbon accents (steering wheel, door pulls, center console, headliner etc)



    ----Exterior----
-wide body(gts/Alltrac) front fenders
-Factory RC/CS front bumper
-fiberglass RC/CS hood
-fiberglass hatch
-Monkey Business lighting 3" projectors with 55 watt HID's
-"INFAMOZ" Black and gold Cali plates
-euro/jdm corner lights and tail light vents(soon to have clear lights with LED’s)
-TTE lightweight mirrors
-soon-sunroof delete
-Carbon rear visor
-6gc side skirts
-will hendersons front lip
-custom rear bumper skirts