1968 Volvo project Pure Volvocity by 68EFIvert

2 minute(s) of a 519 minute read

My rear end and hubs are still off at the machine shop having tone rings installed. I hope to have them back in the next couple weeks.

In the meantime, I have been working on some small items. I have the Restomod heater box mounted, Accusump mounted in front of the radiator, ABS mounted under the fender, modified the firewall for more u-joint and header clearance and mounted the nozzles for the fire suppression system.

I also have the wiring layer out. There was a lot of items there. I have a Haltech ECU that needs to talk with the Bosch ABS, traction control, Compushift transmission controller and the AIM data logger. It also has to talk with the shifter and paddle shifter. Seems like a lot of moving parts and communicating parts to deal with.

I am still waiting on my Lokar electronic sport shifter to arrive. Once that shows up I will mount it and and reinstall the engine and transmission. Getting pretty close to heading back to the body shop for paint.
Accusump mounted along with the condenser and power steering cooler.

The air pressure port extension for the Accusump.

Bosch ABS mounted

The powder coated fuel tank is back in.