1968 Volvo project Pure Volvocity by 68EFIvert

2 minute(s) of a 519 minute read

We have almost finished up the quarter windows. The glass guy needs to come over to make some measurements and figure out a solution for that. After that is done the flange for glueing in the windows will be added. The interior portion of the Windows is done except for the addition of upper seatbelt mounts. The seams on the rear roof and on the A pillars have been removed and the drip rail fully shaved.  

I have been wanting to add some sort of rear spoiler to the car for high speed downforce. I don't want to destroy the lines of the car and have come up with a creative solution. I purchased a spoiler from a Crysler Crossfire which is an active spoiler. It looks like a a flat panel but when activated my speed or a switch it raises up.

I plan on integrating it into the deck lid of the car. The only difference you will be able to see will be a 3/16" line that will run the width of the trunk lid and be about 6" from the end. I should have the spoiler in on Monday and will keep you posted as that idea comes to reality.

After I came up with the idea I was doing some googling and
Came across a Chevelle that has already done it. Here is a picture of it.