You must be logged in to rate content!
2 minute(s) of a 519 minute read
4-10-2019
A little more progress on the kick panels and splash shields. We opened up the kick panels so that I could mount my ECU on the passenger side in it. The drivers side will have my fuse box.. the splash shields are roughed in but will receive some bead rolling and rubber seals . The hole in the floor is filled but I forgot to snap a photo of it. It should work out well.
4-24-2019
A bit more progress on closing in holes on the car. The drivers side kick panel is complete. The area behind the back seat is done as well as pockets for the seat belt reels to fit in. The hole in the trunk is filled. One hole to fill in the passenger rear seat area and then some seat belt anchors to install. Just about ready to fling some mud and primer!
Great photos!
Posted by Diggymart on 12/4/23 @ 3:59:23 PM