By stevegolf
2-18-11
Little things getting done...
Waiting for the paint. Scheduled to go in the paint booth Friday the 25th, and picking it up on Sunday the 27th. Drive train will be ready for the transplant by then.
Transmission is a 2Y, with a modified 3.94 final drive, had to find a 4th gear for a small spline pinion shaft (the 2Y is the only tranny with the larger spline on the 4th gear)
So found a set of same ratio gears on another donor tranny, and fixed it
Wavetrac is in, with the ARP blot kit all the 3.94 FD
All new bearings, new synchros, and cases cleaned up and painted.
Both preloads are done, I just need the puller for the race on the pinion shaft, and back together it goes!
Finished fabbing my front engine mount reinforcement bar also...
As usual, a few pic for clicks!
You must be logged in to rate content!
2 minute(s) of a 234 minute read
1-9-2021
Little things getting done...
Waiting for the paint. Scheduled to go in the paint booth Friday the 25th, and picking it up on Sunday the 27th. Drive train will be ready for the transplant by then.
Transmission is a 2Y, with a modified 3.94 final drive, had to find a 4th gear for a small spline pinion shaft (the 2Y is the only tranny with the larger spline on the 4th gear)
So found a set of same ratio gears on another donor tranny, and fixed it
Wavetrac is in, with the ARP blot kit all the 3.94 FD
All new bearings, new synchros, and cases cleaned up and painted.
Both preloads are done, I just need the puller for the race on the pinion shaft, and back together it goes!
Finished fabbing my front engine mount reinforcement bar also...
As usual, a few pic for clicks!
Nice job!
Posted by Diggymart on 3/3/19 @ 12:38:17 AM