By stevegolf
3-19-11
Finished fabricating my rad supports, and welded up the bottom outlet (clearance problems with motor mount) I also fabbed up a 90 degree angled neck to clear my new rad support, and that way I can use a straight hose to the water pump
My aluminum welding skills are getting better
I also cranked the car for the first time today no sparks, but its ok; I'm sure its just a little something I overlooked...
Just a matter of days before it starts...
Season starts in May, so I'll have time to test & tune! YAY!
You must be logged in to rate content!
2 minute(s) of a 234 minute read
1-9-2021
Finished fabricating my rad supports, and welded up the bottom outlet (clearance problems with motor mount) I also fabbed up a 90 degree angled neck to clear my new rad support, and that way I can use a straight hose to the water pump
My aluminum welding skills are getting better
I also cranked the car for the first time today no sparks, but its ok; I'm sure its just a little something I overlooked...
Just a matter of days before it starts...
Season starts in May, so I'll have time to test & tune! YAY!
3-20-11
First day of spring: Epic!
Rocco gave its first breath of life...
Cylinders have close to 250psi, and started it with ignition in limp mode ...The car, actually resonates & moves your chest cavity. No pics this time, it was worth it to take in video...This will give me the motivation to accelerate my pace to have this done soon, so I can take it the track & dyno to tune it. enjoy!
PS: Sorry if you don't understand the talking in French, but its all good
Nice job!
Posted by Diggymart on 3/3/19 @ 12:38:17 AM