You must be logged in to rate content!
2 minute(s) of a 127 minute read
8-31-2020
well RR can never upload the pics in order..
it might be an open diff but its a 2.541 opposed to the 3.54:1 i have, will knock all the revs down and make it perfect for going down the motorway, theoretically with this diff, gear ratio and wheel size if the tyres didnt blow apart at 130mph the top speed would be around the 200mph mark
cut the wire on the forbidden hole, 4,000rpm gov spring pack put in there, ignore the lack of nylock and nut on the one strut tower
dumped outside under full air pressure lift to give an idea of height, driver rear bag still just doesnt sit right
diff stripped down for a rebuild, seals bushes etc off to get it blasted and coated
my prefered method of bush removal
new bolts, drain + filler plugs and vents ordered too all genuine so should look nice
Comments
I bet the purists probably don't like this, but screw them! This thing looks like a blast!
Posted by stevegolf on 10/22/20 @ 11:15:40 PM
This thing is insane. Definitely not a swap I would think of doing, but it looks like it will be a blast to drive. I like the mad max look you have going too.
Posted by MPower on 10/1/20 @ 8:26:26 PM
Wow thanks for sharing!
Posted by Diggymart on 9/20/20 @ 2:50:40 PM
This is my kind of build right here. Very nicely done!
Posted by Squonkwerkz Garage on 9/28/21 @ 2:07:53 AM