custom ask sport wide body by marley4us

4 minute(s) of a 30 minute read

ok ya I get ya. I may do that. I only cut a 1.5 inch off. It will clear my wheels and let me stay lowered. but ya you are probably right. I should just fully tub the rear, so i can lower it to any height.

I will cut each rear a lil lower, just might be a pain with the fender already on that one side, but hey at least the other side is off still!

Thanks for the advice

SCT- ya I wont contact anywhere I know that already. When I had my fender flares on, the fenders had not been cut. I just raised the rear suspension, and it did not rub on the body... well only would rub a tiny bit if I hit a big bump. 

I cut 1.5 inches off, so I can lower the cusco coilovers back down, and not rub on the body. But I think I am gonna test it, and make sure it will lower completely with out rubbing. If it wont, then I will cut more off.

Infamous- thanks, ya im trying to make a different widebody. I always loved how the Supra's and 240's had widebodys that would transition from stock body to widebody and back to stock body. It had a oem sexy feel.

9-9-2011

well I did not take a lot of pictures but got some good work done.

I cut the fenders back another 2 inches and re welded it up, so that I can slam the car if I want to later. Re-test fit the fenders and rims, I will need to get rid of the spacer and rebarrel my rims soon, so I can get the perfect offset and camber.

We started cutting the passenger side, and welding it back together, should have the other side mounted by friday.

Sanded down the new roof spoiler

, and sanded down the roof trim so I can bond it.

started molding it on. I will have more pics later on.

wow Im so excited, got this shipped from Malaysia in less then a week! WTF this guys shipping rocks!!!!

Friday, September 09, 2011 Location Time 

19 Delivered - Signed for by : I LINDBERG ONTARIO, CA - USA 12:35 

18 With delivery courier ONTARIO, CA - USA 09:18 

17 Arrived at Delivery Facility in ONTARIO - USA ONTARIO, CA - USA 08:26 

16 Departed Facility in LOS ANGELES GATEWAY - USA LOS ANGELES GATEWAY, CA - USA 06:40 

15 Processed at LOS ANGELES GATEWAY - USA LOS ANGELES GATEWAY, CA - USA 06:40 

Thursday, September 08, 2011 Location Time 

14 Clearance processing complete at LOS ANGELES GATEWAY - USA LOS ANGELES GATEWAY, CA - USA 23:30 

13 Arrived at Sort Facility LOS ANGELES GATEWAY - USA LOS ANGELES GATEWAY, CA - USA 23:25 

12 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 16:02 

11 Processed at HONG KONG - HONG KONG HONG KONG - HONG KONG 14:37 

10 Clearance processing complete at HONG KONG - HONG KONG HONG KONG - HONG KONG 07:24 

9 Arrived at Sort Facility HONG KONG - HONG KONG HONG KONG - HONG KONG 01:35 

Wednesday, September 07, 2011 Location Time 

8 Departed Facility in SUBANG - SULTAN ABDUL AZIZ SHAH - MALAYSIA SUBANG - SULTAN ABDUL AZIZ SHAH - MALAYSIA 21:06 

7 Processed at SUBANG - SULTAN ABDUL AZIZ SHAH - MALAYSIA SUBANG - SULTAN ABDUL AZIZ SHAH - MALAYSIA 21:05 

6 Arrived at Sort Facility SUBANG - SULTAN ABDUL AZIZ SHAH - MALAYSIA SUBANG - SULTAN ABDUL AZIZ SHAH - MALAYSIA 06:29 

5 Departed Facility in KUALA LUMPUR - MALAYSIA KUALA LUMPUR - MALAYSIA 03:34 

4 Processed at KUALA LUMPUR - MALAYSIA KUALA LUMPUR - MALAYSIA 03:34 

Tuesday, September 06, 2011 Location Time 

3 Departed Facility in KUCHING - MALAYSIA KUCHING - MALAYSIA 22:35 

2 Processed at KUCHING - MALAYSIA KUCHING - MALAYSIA 21:05 

1 Shipment picked up KUCHING - MALAYSIA 17:00

3M body body panel bonding ...epoxy I think? I know its called 3M body panel bonding.

alex- ahhhh I found it!

"3M? Automix? Panel Bonding Adhesive. Two-part epoxy used to bond steel, aluminum, SMC and FRP."