You must be logged in to rate content!
2 minute read
46. Remove the two highlighted screws at the hinge of the cover.
47. Remove the six screws that connect the two halves of the lid. Wrap the cover over the top of the lid and screw the two pieces back together.
48. The cover should wrap all the way around the lid and be tucked in between the two pieces (screws will keep the cover in place).
49. Be sure that the cover is firmly between the two pieces all the way around.
50. Reinstall the lid with the two screws at the hinge. Here is the final product.
Congratulations, you're DONE!
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
