You must be logged in to rate content!
2 minute(s) of a 338 minute read
6-10-2014
Update: My JCS a pillar cluster gauge is on its way here. Waiting to here back and see if my gauges have arrived in yet. Hoping to get my plugs, intercooler piping, AOS, fuel pump, ebcs, driver front fender well, front underside splash guard and coilovers on this weekend.
6-19-2014
First thing I did was replace the inner fender well. First thing I did was put it up on a buddys lift and took the tire off.
First pic is the damaged part of the inner well. This all happened when I was backing out of a friends yard and my front lip hooked into the ground and hauled the driver side of the bumper off breaking the clip joining the fender to the front bumper and numerous clips in the fender well and underneath the front bumper.
So I removed the rest of the clips inside the inner fender well and seen in the pics.. (The pics are bright so I apologize.)
and there are these 3 little clips that can be removed with a Phillips screw driver and also a flat top. In order to remove these you would have to take out 2 clips under the side skirt (be careful these clips are easy to break) and also haul out on the piece that contains the sti emblem (which is in between the side skirt and fender)
After that I washed her up and and took a pic of the new fender well.
What I use to wash my car
And the inner fender well
