71 Cuda Pro-Touring Build by johns cuda shop

2 minute(s) of a 81 minute read

Modified the rear seat , I cut a 4"X4" square on each end then followed with some 1/4 CRS round bent 90 degress so the roll bar tubes can pass thru.

10-24-2011

I had to make some new corner brackets out of some 3/32 steel plate because the cowl bar interfered with the originals. Other mods include Filled in front license plate area on the front bumper, deleted the buper bolt holes with a 3/8 studs welded on the back side for mounting to the brackets.I will have to shave the bumpers more to tighen up the gap between the bumper and the body.