You must be logged in to rate content!
2 minute(s) of a 255 minute read
2-25-2017
I made a visit to Coachwerks on Friday:
For detailed photos of the work done in the past two weeks, go here: http://www.coachwerks.com/MT1966Peugeot404C/update-2.html
3-3-2017
Friday afternoon I visited Coachwerks.
The new front crossmember is on, some significant repairs were needed on the driver's side inner fender and that fender is now tacked in place, with fine-tuning and possible future adjustments to follow. Next week I have to take the rubber seals down for panel alignment purposes, as well as the grille.
The old front crossmember didn't look all that bad but when it was off, the bodyman in the photo above showed it to me and shook it, and it sounded just like a Maraca
They will be painting the front brake drum backing plates, the Hydrovac vacuum tank and the air inlet grille. I will repaint the brake drums myself in manifold paint. I had them blasted at Blast-it in Victoria today and I even did the vacuum tank blasting myself!
Wow a labor of love. Great!!
Posted by Diggymart on 9/7/19 @ 4:02:23 PM