Badev0's Build part 2 - Built 2.0/FF 6266 by badev0

2 minute(s) of a 206 minute read

They are for your cooling system.. and there is 8 of them. 

You must be thinking of something else. 

6-2-2013

I took the motor out Friday night. It will be going to my friends shop where the cage was done for some threaded billet freeze plugs and some o-ringing for cheap insurance 

6-5-2013

Threw this together when looking through some pics of old slips I have. Kind of cool looking at. These are on the stock motor. 

6-10-2013

Turns out the car is now getting a TRE 12-plate max lock rear diff while its down. 

The rear diff in my daily driver burnt up from using the OEM spare ( I didn't think this would be an issue since the car is on OEM wheels with OEM tire size). Well, mitsubishi is stupid and turns out the diamater of the spare is 23.x and not 25.3 (stock diameter). I took the stock rear diff out of the black car and put it in my daily driver. Burnt up diff from daily is getting the rebuild/upgrade service from TRE which will go in the black car. Kind of works out