Badev0's Build part 2 - Built 2.0/FF 6266 by badev0

2 minute(s) of a 206 minute read

1-13-2013

I tightened the vacuum fitting and went to do a real pull. The engine seems smoother in boost then the stock motor. It pulls incredibly nice at 34.5lbs. It made about 630 in virtual dyno which in my car is about 140 traps. Pretty good for a low boost base map lol. 

We found an old data log for comparison, the car is currently making the same power as early last year with 4lbs less boost. That is good. I'll get a graph up once we up the boost for full power. The car also spools a little faster as well. 

I attempted to slash cut the dump tube as well. Oh yeah, in WOT this sounds crazy!!! Much easier to tell when you're at full boost then before when it dumped under the car. 

Sorry the crappy photo. 

It does not touch the hood or grill, good clearance so nothing will melt. 

1-23-2013

Got the lug nuts i'll be using for the slipstreams. I had used these same nuts two years ago when I had 5zigen fn01rc's on the car. I like them a lot and the price is right!

Tires will be ordered the first week of February