You must be logged in to rate content!
3 minute(s) of a 173 minute read
8-29-2012
8-29-2012
some pics from last weekend with NARRA / RTA at Monticello NY
11-8-2012
i picked up these RB stainless pistons and seals from my sponsor.
ss pistons - http://www.shop.motorsportsperforman...per-BM-41P.htm
seals - http://www.shop.motorsportsperforman...rs-BM-41BS.htm
OE 46mm pistons = 0.18 lbs, RB SS = 0.225 lbs; .045 difference
OE 40mm pistons = 0.14 lbs, RB SS = 0.19 lbs; .05 difference
that's a total of 0.19 lbs (1/5 lbs) difference for all four pistons for one caliper.
oem dust seals all burned and cracked
opening up the calipers
caliper split in half
oem pistons next to stainless pistons
use compress air at the bride port and a used pad underneath to prevent one piston from coming out complete and not allow the other one to come out.
remove the oem dust seals
remove oem piston seals
clean out caliper
new stainless pistons and dust seals ready to go in
lubricate the pistons with some brake fluid so they slid in easy
all four pistons are in and ready for reassemble
