You must be logged in to rate content!
3 minute(s) of a 66 minute read
2-26-2013
whilst i was at work today my dad got on setting the door on the other side and roughing
out the other doorstep he might have got futher if he hadnt of snapped the only drill bit for the self tapping screws!
so when i got home from work we started to remover the inner wing.
the hole that allways rots straight through to the crossmember!!
thats it for tonight.
3-5-2013
picked these up from my local fabricators today fully refurbed.
50 quid for the pair
3-7-2013
time for an update!
started off by gettimg underway with cutting out the passenger inner wing
whilst i was doing that my dad was doing the repairs needed to the other side
he then started to bend the metal to repair the part that the inner wing attaches to.
also he started to cut and tack the panel that holds the door switch into place.
then right on que scott from minispeed turned up with my innerwings and passenger a panel
that I have been waiting for.
thats your lot for tonight.