Mini Pickup Restoration Project No.2! Finally Underway! by pickupmad87

2 minute(s) of a 66 minute read

little update started off by welding the other wheel arch on.

then we detached the load bed from the floor and the subframe and turned it over and drilled the hole where the load bed is going to attach to the heel board.

next we ground all the welds down nicely 

sprayed some weld through primer where the loadbed attaches to the heel board

tomorow we will run masking tape along the holes and finish preping the underside ready for some acid etch primer.

we also run sikaflex along the seams of the welded in wheel arch.

thats it for tonight more to follow tomorrow.