Supercharged K20a2 Vtec - Race Spec by cptkirk

2 minute(s) of a 377 minute read

Got some fibreglass bits back from my good friend Stuart Jago, cheers Stu.

Firstly the Diffuser and secondly the Inner Arches, all that time and effort making wooden plugs has finally paid off, I will get pictures of them mounted as soon as they are......:

7-16-2009

A quick one to show a way of watertighting the brakelines as they come through a bulkhead, can be any bulkhead.

1x Skintop 25mm gland (17mm ID), 1x offcut of 8mm fuel line, 1x 3-1 heat shrink (12mm-4mm). Slit the fuel pipe along its length, slide over the brake line, slide the heat shrink on over the brake union and upto the fuel pipe, heat it up and hey presto you got yourself a watertight seal thats roughly a 17mm OD, just the right sixe for the gland.

7-23-2009

I GOT STRIPES...........

After much 'changing the mind' I finally decided on my stripes for the car, wasnt an easy decision and there have been more changes than I care to mention. I think that what I finally went for does look the dogs danglies, but then thats my opinion.

Any how, here they are: