Frumpy Gets Some Love by benjy_18

4 minute(s) of a 177 minute read

Roll cage tubing has arrive and so has the turbo, so mucho progress to come!

Started mocking up the turbo onto the engine tonight to get a rough idea of what I'll need

10-17-2013

Sal, you should see the inside!!!!

Been off work ill for a few days so I've been messing around in the cave, just Ben working on the manifold and sorted the edits module bracket

Manifold flanges started

Also had some AN fittings welded onto my fuel tank so I can start sorting out the fuel system plumbing now

10-20-2013

Ordered a load of AN fittings for the fuel system, shame that £100+ has only managed to get me to the rear bulkhead!!! Much more to end yet!

Should have my drivers seat by the weekend so I will get the other seat rail in. Then I need to finish off the passenger floor/sill area and begin prepping the interior for paint!!!

Luckily I have a 6 day weekend coming up soon so will be going for a huge push to get the interior finished with the roll cage welded in and at least in primer

Wish me luck!!!

10-22-2013

An fittings turned up today, so I started to rough up the placement of pump/filter and fittings etc

Few photos for you all

Still trying to decide on where to locate the filler neck!

10-27-2013

Loads of progress this weekend!

Picked up my suzuka pro seat (drift works edition) so sorted out the drivers seat rails, then took on the roll cage!

Drivers side is all mocked up ready for final welding now so once the passenger sill/floor is done I can carry out the final welding on the cage

Few photos