My Mini Resto by minimk1

By diyauto
( 2 )

7 minute(s) of a 266 minute read

1-25-2014

been busy today. decided i like the striped out look and so the dash area will be sanded back again to be sprayed nicely. mounted up my seat and steering column, also made sure  mounted up the gear selector which i dismantled,cleaned and painted beforehand. once this was all mounted i had a sit in the car and realised that my gear stick needs cranking so i took it out from the selector heated it up in the fire and bent it into shape. the bend i put in moved the leaver around 2" closer to me and so felt so much better. i have to say the positioning of where i sit is incredibly comfortable and go-kart like. other than that i mocked things up such as centre binnacle and fresh air vents which i had to position differently due to the extra roll bar i put along the dash. painted and cleaned things like the horn and lhs master cylinder blanking plate, also mocked up my fuel tank, fitted the handbrake and other little bits such as switch panel, accelerator pedal, brake light sensor on the pedal box.

 

cant wait  for Bingley tomorrow. when i get back i shall be uploading pictures of my purchases, with hopefully many being bargins ahahah till then......

 

B099CB50-355F-4828-865F-423D1A122CA4_zps

F841A1A2-0E6F-4AE0-B97D-1514ADE80C81_zps

E9B415FB-9730-4F1C-85F6-8B98B3C23281_zps

B5E01130-5D14-4B58-8BE4-FBF6E54C843D_zps

746DDF87-3361-445F-91A1-288B2EF9EA31_zps

9BABFE08-725B-4849-ABD0-9404D8D5C8D0_zps


1-26-2014

been busy buying stuff at bingley today. however needed less than all the other times i have been so didnt come back with much, however saying that for alot of the stuff i either thought i could get it on ebay cheaper or just get it at minispares which saves me the hassle of carrying the stuff and buying so much in a busy crowd. 

 

i did get:

 

works rally exhaust 

rear hi los 

mk1 interior handle 

duplex timing chain 

mk1 window catches 

mk1 window catch rubbers 

screen heater vent for 50p

 

oh and i also picked up my harness which i am very happy about. fitted these and mocked up the exhaust when i got home, however i could only mock up the exhaust as one of my brand new mountings didnt tighten up, as the stud span around in the rubber, which i wasnt happy about.

 

i will be fully sanding the exhaust and painting it with high heat resistant spray which will be a nice matt black ! 

 

 

IMG_2293_zpsdd205245.jpg

IMG_2292_zps1d40f4e7.jpg

IMG_2291_zps7eb008bb.jpg

IMG_2290_zpse73ad1b5.jpg

IMG_2288_zpsc3e46ca5.jpg

IMG_2287_zps729e1232.jpg

IMG_2289_zpsa4fd1ed7.jpg

IMG_2286_zps981b2995.jpg

IMG_2285_zps12209c23.jpg

IMG_2284_zpsdc1cac9f.jpg

IMG_2283_zps8fc500be.jpg

IMG_2282_zps3b6deb98.jpg

IMG_2279_zps41ba172b.jpg

IMG_2278_zps897d1330.jpg

IMG_2277_zps48492244.jpg

IMG_2276_zpsfcaee4a9.jpg

IMG_2275_zpsc488608c.jpg

IMG_2274_zpsd98ecec5.jpg

IMG_2273_zpsa4dd4db3.jpg

IMG_2268_zpsbe18a25c.jpg

IMG_2269_zpsa0b06a9e.jpg

 

thats all for this weekend, next weekend i will be spending it up at mini-spares


oh and some picks i got of the day, and that beast of a 16v supercharged. i was looking at the 16v engines thinking thats going to be in my car in 2 years time hahah 

 

IMG_2253_zps1d760621.jpg

IMG_2254_zps8d0a6234.jpg

IMG_2255_zps1a5fa64f.jpg

IMG_2256_zps01e13eda.jpg

IMG_2257_zpsaa6b9316.jpg

IMG_2258_zps6fbb607b.jpg

IMG_2259_zps6e8f6938.jpg

 

my favourite shot >>>>

IMG_2260_zpsdacd954a.jpg

  

IMG_2261_zps0962f278.jpg

IMG_2265_zps7dfb9eac.jpg


Latest purchase

Facet fast road fuel pump complete with filter, mountings, unions etc well pleased




Comments