Project "tatties" He's A Clubman You Know! by AndyMiniMad.

2 minute(s) of a 35 minute read

Weber has been given a clean bill of health ..I had stripped it down and bebuilt it after cleaning everything. the float valve jet and filter were full of sand and grit!!
Anyway they checked all the jet sizes and tube things, and confirm that it will go fine with my 1380 engine spec. "Its loaded for bear"





Im biding on a couple of new ram pipe trumpet thingys at the moment..these ones cleaned up ok but I want the best flow possible into the venturi's so the shineyer the better..

7-30-2012

A few pics of the latest progress..

Bonnet!!







I made a new section from 1mm steel for the inside of the door post. the old one was ok but I didnt want any holes so I made this.



Anyway thats all for just now...slowly slowly catchy monkey!!