You must be logged in to rate content!
5 minute(s) of a 569 minute read
9-5-2012
Worked on few this over the past few days..
Cluster surround, fiberglassed and process of smoothing out.
making my own MS R-Spec signal lights
Studded everything and shorten bolts so I could put FD chrome nuts and bolts for the LIM.
This was from about 3-5 FD engines
And starting to test fit everything and such..
9-10-2012
some of the goodies that are going in in this car..
Aluminum rack..
Carbon Shaft.
FEED trunk thingy in carbon
9-13-2012
This is Atomic. I need to thank Chip from Chipmotorsports for selling his extra one.
more update...
I finally took some time to work on the rear diffs of the FD RX-7s.
Here are some pics of the diffs.
Stock vs Kaaz
After cleaning the case, sanding it down, and re painting it with epoxy paint,.. I put the new covers on.
Stock vs. Greddy higher fluid capacity cover.
9-19-2012
Sept 16th, 2012 - Little bit more update...
Took some time getting the transmission painted and such.. Some color scheme.
and becoming a master of taping
Also, plugged the oil metering hole
and another angle of the painted diff..
Sept 19th, 2012 Updates from past 3 days..
I had the rotor hats made for the Disc Brakes Australia rotors and got them refinished in similar black.
Cleaned up and repainted the RZ calipers.
I also replaced the diff bushings with Powerflex bushings.