You must be logged in to rate content!
2 minute(s) of a 390 minute read
6-1-2013
6-1-2013
Ceramichrome
I have to say that I love this stuff. The engine is coming together as my parts are starting to come back from being coated. Getting very close to just needing my exhaust manifold and Vmount. My fuel pump components are in and I plan to tackle that tomorrow.
6-2-2013
Dual Pumps
Dual pumps are together and installed. I will go over a few of the parts I selected and why I chose what I did.
I did plan to utilize dual check valves inline with the pumps. I ordered two Aeromotive check valves in hopes that I could squeeze them in the assembly. Unfortunately, they are too large. The only way I could get them to work is with an aftermarket assembly, and dual output lines being Y'd external to the tank.
The install is pretty much like every other dual pump setup out there. However, when searching of a way to supply voltage to the dual Stealths, I was having a hard time finding a solid solution. I found a great universal bulkhead from Racetronix.
Racetronix - Universal Bulkhead Wiring System, 4-Way
Everything else went in well.
