My 93 2.5 low output build by zte87

By diyauto
( 2 )

10 minute(s) of a 289 minute read

6-14-2012

Thanks jd do you have a build thread? So today I tossed my old 1.25 bl back on to get it ready for 35s I would say with some bump stops I should have room to spare!




6-22-2012

I was rubbing with the 33s before bl so I think I will still need bump stops haha I flex out pretty well for a yj! So I sold my old s35 today for 450 and instead of dumping that back into the jeep I bought a new dd (1987 Subaru dual rang 4x4) now I don't have to worry about dd the old girl and can make it more of a toy!



6-26-2012

So I am going out wheeling weds with 91BoD and should have some new wheeling pics then I can't wait till then here are some bad vid clips of my last trip out! And sorry no real cool build updates haha I did tint my turn signals tho!



6-28-2012

So like I said I was going wheeling with 91BoD today and everything went smooth for us leaf sprung yjs all tho on the second trail of the day my buddy with a toyota twist/broke his rear drive line which ended his day and towards the end of the day of friend with a coil over yj broke his LF radius arm right off his axle, but all and all it was a great day out! It was fun watch BoD wheel with a front locker, I had to have him pose on my tires ahah! sorry there aren't more pic (action shots) we did't really have to stop at any obstacles because we are a group of pretty capable rigs!












7-11-2012

So I have't done a whole lot lately to the poor jeep besides wheel it, but in the last month I have been pulled over 3 times for my tire hanging out to far so I went ahead and put some 8 wides wheels back on it! They still hang out a little but not half as bad! I also ordered a rf tierod seeing in how mine is wasted, and I also have a new axle seal and gear oil for the front axle. As soon as the weather goes south i will start some tlc on it!




7-15-2012

So I took out my sister wheeling today (the reason the doors where on) and had a blast! I did how ever bend one of my brand new wheels, and gave my rear of my tub and my drivers door some rash! Also when I was pressure washing the jeep I notice that my rf upper shackle bolt lost its nut and was almost walked out of the shackle........I am glad I found that before jumping on the hwy with my wife and kiddos!


















8-6-2012

Wow it's been awhile since I posted in this but not much has been going on with the jeep, I have been really low on funds being I have my third and final child due oct 2 lol, but as of today I took my high lift off my hood and mounted it to my rear bumper but over all the jeep is the same with very little change.





8-9-2012

I am glad you had fun, I was going to say at the very least you should visit pikes place and we are not all that friendly hahaha! So again no cool up dates but I did mall crawl today



8-11-2012

Today I tackled my leaking axle seal in my front diff. I have been putting it off for awhile because I just did't feel like there the Dana 30 apart hahaha god I am lazy! I installed two napa 11800 into the rf side and it seems to of worked great, we will see how they hold up after this weekends wheeling outing!



Here they are!




8-12-2012

Well I picked up those sliders from 91BoD and let me say I am super happy with them, I will be testing them off tommarow what do you guys think......










I cut up my old sliders up and plated the in side of the tub! Look past the dirty tub it been a while since I hosed it out!



Took it out for some doorless/topless wheeling and a great time with zero breakage!





9-1-2012

So when I did power steering swap I used cheap house brand fluid and when I am out wheeling my ps fluid seems to get hott which thins out the cheap fluid and makes it really noisy and and had to steer. So I am flushing the ps fluid with synthetic amsoil ps fluid and I am also adding a cooler to the ps system! I hope it helps I plan on installing it this week end!




Comments