Louie4's YJ by Louie4

5 minute(s) of a 411 minute read

Update time. I've been focusing on the Poison Spyder fender install as many of you know:

http://www.jeepforum.com/forum/f12/poison-spyder-fender-installation-1382954/

I also picked up a new O2 sensor. My computer has been throwing the code for the O2 sensor. I tried clearing it because I had my exhaust replaced but it kept coming back so I wanted to get a new OEM one. It's a Denso, not a Bosch.

The sensor looked just like the stock one I took off years ago. It also came with a little packet of anti-seize. Very good sensor. After I installed it and drove it around it felt like my jeep had more pep. Sounds crazy but it just felt more responsive.

Here's some pics of the fender install and current state of my jeep. I'm waiting on the fenders which are being powder coated.

Here's some pics of my old Bosch O2 sensor. I guess it was leaned out? Note the splice job I did years ago. I think that may have affected it as well.

7-1-2012

Not much of an update but I was able to do something inside and not melt in the 105 degree weather.

I got some JB Weld and patched up my washer bottle. I drilled through it when I was installing my PS DeFenders. To keep the goop from going through the hole I put a small piece of tape over it and then put the JB Weld on it. I'm waiting on them to get back from the powder coat guy right now.

7-7-2012

I got my fenders back all nice and powdercoated. I have both bolted on but I don't have a final assembly pic. It got too dark.

I also painted the fender wells to give it a cleaner look. My doggy Georgia helped out as well.

7-15-2012

I just realized I need to post pics of my completed fenders.

7-17-2012

I got a little done yesterday. I wired in a trailer plug last night to pull a small trailer this evening.

It was actually pretty easy especially when you have a voltmeter.

I also took my jeep to work and used Mean Max's method to aligning the front end.