TK's Yellow Krait LJK Buildup by tkfx

2 minute(s) of a 91 minute read

This last week I got a delivery from Poly Performance and Ruffstuff. I ordered the poly performance sway barbrackets and ordered some shock tabs off Ruff Stuff. Im going to have to cut up the poly brackets a little to make it work for my setup; my passenger side sway bar link is going to go in between the drag link and tie rod, VERY tight fit. Also im going to have to cut off the old shock brackets on the axle and put in these new tabs so the shock sits about 3" lower on the axle tube. This way I will be able to have more usable up travel as my coil over was limiting my up travel severely. 

Also started putting in the PS stretch corners and the CJ tailgate.

11-16-2014

Got the stretch corners on, got the CJ tailgate on, and got in the LED tail lights. The corners lined up perfectly with the ****tybuilt sliders which was a surprise. Picked up a CJ tailgate from a jeep junkyard with all the hardware for FREE! The owner of the junkyard gave it to me because I had been going to his place for all my replacement parts. Once I get my PS tramp stamp that goes under the tailgate, Ill take the tail gate off, blast it with a fresh coat of paint and the rear will be set. Now I just need to wait until my grandpa doesnt need his 220v welder so I can weld up my new coilover brackets and swaybar brackets.