You must be logged in to rate content!
2 minute(s) of a 286 minute read
10-18-2011
Not much done today, had a dinner meeting at Rum Runners
so only had a chance to put together the engine stand and strip some of the front off before leaving work.
The plan is to have it all out and going to the scrap yard on Friday, we'll see how that plays out.
10-22-2011
Well like the rest of this build the motor is coming out of the van slowly. After dismanteling the front some I raised it up in the air (benifit of working some where with lifts) and disconnected the trans, exhaust, starter, motor mounts, drained the radiator and removed hoses, steering pump lines etc. so it should be ready to come out on Monday.
10-25-2011
Once again spent alittle time after work removing parts from the donor. It is ready at this point to come out. will drop the trans then pull the motor and send it on its way to the crusher by Friday.
Items to find and/or buy:
Durango/Dakota air inlet
Dakota Radiator Hoses
Motor Mounts
98' Jeep GC 5.9L fan & 4.0L fan shroud
Radiator
Throttle cable
summit racing Headers SUM-G9064
etc. etc. etc..........